|
|
Victor Out of Sight Mole Trap - Single Click on image to enlarge Victor Out of Sight Mole Traps - 2 Traps Quick Links: More Pests: All Pest Control Products : Aerosols : Baits for Insects:Application Equipment Mole traps |
Mole Control | Mole Control FAQ | Mole Traps Online | All Mole Control Products
Model 0631 Out O'Sight Instructions for Victor Mole Traps
The presence of moles will be indicated by mounds of soil created as they construct their tunnels. To locate tunnels in frequent use, clear away a mound of soil and probe for the opening usually a short passage that leads down a few inches to the main tunnel. Place mole traps in this tunnel. To
Place the Victor Mole Traps: Build a mound in center of hole using loose soil. Place mole traps in the hole, pushing down firmly until it rests on mound. Fill in tunnel entrances with soil. Release safety hook. NOTE: Place a box or board over mole traps to avoid danger to children and animals. To Set the Victor Mole Traps:Place setting levers on mole traps spring as shown. Carefully draw setting levers together. This will require some strength. When levers are fully compressed, place end of locking bar on trigger pan. Temporarily set the safety hook around top of other mole trap leg. Remove setting levers and place Victor mole traps in mole runway. Release safety hook only when mole trap is properly positioned. Note: To reduce sensitivity and increase trigger tension, bend trigger pan slightly with pliers. Caution should be taken when setting mole traps so that injury does not occur. Keep out of the reach of children.
There are several methods of mole control on the market: baiting with mole bait, gassing, repellents and trapping with mole traps.
With all the methods and particularly with mole trapping, patience and persistence are the key words. Trapping with mole traps is usually easiest during the spring and fall with mole activity is at a peak. Trapping in the spring can also eliminate the pregnant female moles, reducing population.It is completely essential to locate the main runways for successful trapping with mole traps or baiting with mole bait. To identify main mole runways look for runways which:
To use a mole trap, such as VICTOR OUT O'SIGHT MOLE TRAPS first flatten the mole tunnels by stepping on them or by using a lawn roller. This will allow you to tell which mole tunnels are being used, because new ones will appear the next day. Put the mole traps on these new tunnels. Set the mole trap and leave it, taking care not to trample or disturb any other portion of the runway system. Check the mole trap once or twice a day. If a mole trap fails to produce a mole within 4-5 days, move the mole traps to another portion of the runway system or use another runway.
TALPIRID MOLE BAIT- KILLS MOLES Talparid mole bait's size, shape and feel let moles consume the
bait in the same manner as its primary food source, the earthworm. Talpirid Mole Bait:
Although the poisonous gases such as
Is is suggested that spraying or treating the mole's food source (insects and grubs) would eliminate the mole population, which had been true before products such as Ficam Granules and Oftanal had been on the market. There are currrently no insecticidal granular including Talstar and Bifen LP that would penetrate deeply enough to be effective. There is a repellent on the market that offers short term results:
|