| Also for Snake Control
Snake Away Snake Repellent
How Snake Guard Traps Work
The easily assembled Snake Guard Snake Trap
uses a specially formulated and strategically placed glue inside a rectangular
box which is 18 inches wide, 30 inches long and 3 inches high.
The trap design allows for snake entry from either end, after it has been
placed and stabilized against a wall or other vertical surface.
Always, place trap along a vertical surface such
as a wall.
The suggested use is one to two traps per room. In large
rooms, you may want to use more.
The following picture sequence shows the result of proper trap placement.
How to use the Snake Guard Snake Trap:
Set the trap . . .
Snake enters trap . . .
Snake is trapped !
Snake Guard allows the snake to be safely released.
- Snakes are important in maintaining a proper ecological balance and we encourage their release. If you have concerns about releasing the trapped snake yourself, you may prefer to call a local exterminator, wildlife rescue center or other appropriate animal control agency for assistance in removing the trap.
- To release the snake yourself, you should first relocate the trap to a remote, shaded location away from the area of capture. After carefully opening the trap to expose the snake, pour liberal amounts of vegetable cooking oil on the snake and on the glue surrounding it. The snake will typically be able to free itself within an hour.
The Snake Guard® movie (Produced by Dr. T's )shows the
snake trap in use.
You must have the free RealPlayer 4.0 or better to view
Click here to get the free RealPlayer.
If you already have RealPlayer installed, click here to Watch
the Snake Guard movie.
If you experience problems viewing the movie, RealNetworks offers additional